Qseven to ETX/XTX Adapter Board

Q7-ETX-240 Front View

  Allows Qseven Modules to be used with ETX/XTX baseboards.

  Take advantage of new low-power processor technologies in your existing product solutions.

  1x IDE Port.

  2x Serial Ports.

  1x Parallel Port.

  1x VGA output.

  1x 10/100 Ethernet.

  2x USB 2.0 Ports.

  Low power consumption.


Motium's Qseven to ETX/XTX adaptor board allows you to use the latest low-power processor technology based Qseven modules in your current ETX/XTX baseboards, giving a simple upgrade path.

In addition to the interconnects between the two form factors, the adapter board provides the legacy ports missing on the legacy-free Qseven Module.

An operating temperature* range of -40°C to +80°C allows the Qseven-to-ETX adaptor to be used in the same environment as standard ETX and XTX modules.



Specifications

Specifications for the Qseven to ETX/XTX Adaptor Module are listed below.
Qseven Interface
Supported Qseven Modules Supports all Qseven modules.   Tested with the Congatec CONGA-QA.
Features Connected ATX Power Control, USB Overcurrent Protection, LAN Connectivity, SATA activity LEDs.
VGA Output
Interface Chipset Chrontel CH7317 SDVO to VGA interface.
Video Output VGA: Analog RGB, 0.7Vp-p. HSync & Vsync.
Supported resolutions Dependant on Q7 module and connected Monitor.
Maximum resolution 1920x1600.
IDE Interface
Interface Chipset JMicron JM20330 SATA to IDE bridge.
ETX/XTX Signal Interface Supports a single drive on baseboard Primary IDE bus.
Supported Drives Any standard IDE drive such as HDD, CF Card etc.
Serial And Parallel Ports
Interface Chipset Winbond W83627HFAW Super I/O. Connected via LPC bus.
Serial Interface 2x TTL level outputs connected to Port A and Port B on ETX/XTX.
Parallel Interface EPP Compatible Parallel Port.
USB 2.0
USB Ports 2x USB 2.0 Ports connected to USB0 and USB1 on ETX/XTX.
10/100 Ethernet
Connection Connection of ETX/XTX Ethernet lines through to QSeven Ethernet port.
Physical Characteristics
Dimensions 114mm Long x 95mm Wide.
Weight ~50g.
Shipping Boxed or Bulk Packed.  Shipping weight and dimensions TBA
Ambient Temperature Operating*: -40°C to +80°C.
Storage: -40°C to +80°C.
Humidity 10% to 90% RH, non condensing.
Certification C-tick.   Other certifications available upon request.
Power
Power supply Input voltage 5VDC (from ETX/XTX baseboard).
Power consumption xxW maximum.
    *Except for Chrontel CH7317 SDVO to VGA interface.  Operating Temperature is limited to -20°C to +80°C.
    Specifications are subject to change without notice.
^ top

Model options

The Qseven to ETX/XTX Adapter Board is available in the standard models listed below.   The module can be
customised to meet specific customer requirements (MOQs will apply).
Model Option
Q7-ETX-01 Standard product as described in the specifications above.



+ click the images for an enlarged view